Customizing Combinator 2

TRINITY RECORDS

Reason Pro
Hello to all, (Thank you for reading my thread.)

I found a neat trick to scratch using mimic. I've decided to give it a try. Inspired by DeepLink's Video.

While editing my combinator, I decided to use a cross fader like a dj mixer uses.

How do I make the sliders go Left & Right vs Up & Down? I want to fit it nicely in the middle

I will need help understanding how to modulate the Reverse On (Mimic Sampler) and Speed parameters using LFO's and the combinator's CV input. (I Noticed there are no CV OUT to connect them from one to the other)

I am trying to create a Patch that could be used to imitate the Serato Scratch DJ Sampler.

Anyone care to share their tricks?

Screenshot (805).png
 

TRINITY RECORDS

Reason Pro
SRATCH WITH MIMIC .png



Uses 8 SAMPLE Slots connected to Matrix via SEQ 1 to 8. SEQ button must be turned off manually to select a new one. I could use some help with automating/configuring this part. I would like to force the switch to sleep when a new SEQ slot is selected. I am opened to different strategies.

I could not connect the SEQ buttons directly to the Sample slots so I had to work around it by using a sequence playing 8 different notes, 1 per sequence.



Left/ Right DJ MIXER FADER IS MISSINGHOW TO FADE FROM LEFT TO RIGHT... Any ideas ?
REV = Toggle Reverse ON/OFFAutomate or keep mashing REV while SCRATCHING.
Vinyl = Toggle Between Vinyl or Tape effect.Adds Vinyl or Tape effect. Can be turned off Manually.
RUN = Run Selected Slot Sequence ON/OFFEach sequence connects a note to it's own Sample slot.
SEQ = ON, Enable Sequencer, Remove Midi Control.
SEQ = OFF, Receive Notes from Midi Controller
This was working Fine, I could use help with this... I do not know where I went wrong but it would be nice to play notes for live recording when SEQ is toggled OFF.
BEND = Pitch Bend. -24|24+Static Pitch bender. It behaves like a Dj's Pitch fader.
SCRATCH =Pitch Semi 1-8Automate this or keep mashing REV while scratching.
TRANSFORM = Amp Gain 1-8, TRANFORMER SCRATCHAutomate this UP & DOWN for for optimal results.
SPEED = Stretch Speed 1-8Set the basic playback speed of your Sample.
FREQ = Filter 1-8Set the Filtering Frequency to your Scratch Sample.
VOL= VolumeChanges the volume in your car... (lol, Just kidding)

This is all I have for now... I used a Kick drum sample in slot ! to give it that typical feel right off the bat. The other slots are loaded with BX Vocoder stock voices just to have something in there and make sure they work.


You can download it and see for your self. Any feedback would help; Thanks!


Trinity,
 

Attachments

  • Scratch Like a DJ.zip
    292.8 KB · Views: 16
Top Bottom